Quantity   Component name
1 × Seeeduino Stalker v3.1 A cheap Arduino UNO derivative with adjustable logic level (3.3v or 5v)
1 × Sensor shield Convenient breakout for arduino pins with electronic brricks interfface
1 × Mini USB cable Gotta program it somehow
1 × SIM808 GSM GPS GPRS module (Itead) Breakout for the sim808 chip with a battery charger, antenna connectors and control pins
1 × GSM antenna GSM antenna with u.FL cable
1 × GPS active antenna A convenient GPS antenna with magnetic mount
2 × SMA to u.FL connector cable For connecting antennae to the SIM808 breakout NOTE: antennae we used are shipped with these
1 × Li-Ion battery, 3.7v 4400mAh More than enough juice to keep it running till sun comes out
1 × 5v 400mA Monocrystalline PET solar cell To keep the battery charged
16 × 4-pin crimp connector housing For HC-SR04 wiring
20 × 26AWG wire with pre-crimped terminals, 90cm For HC-SR04 wiring
12 × 26AWG wire with pre-crimped terminals, 60cm For HC-SR04 wiring
3 × 4x1 male header pins For connecting wires to desired lengths
5 × Ultrasonic range finder HC-SR04 3.3v variant Pings the bottom of the can to check how much trash's inside
1 × 1x4 female-female jumper wire, 20cm For the tmperature sensor
1 × Temperature Sensor Brick Semi-conductor type, precise around 25 deg Celsius
1 × 2-pin JST-PH cable To connect solar panel and battery