Quantity   Component name
1 × Raspberry Pi 3 Standard Edition, 2016
1 × Sonic Alert SS12V the bed vibrator I already had laying around. the customer support were awesome in giving me the spec info I needed
1 × Adruino Uno R3 A000066 https://www.amazon.com/Arduino-Uno-R3-Microcontroller-A000066/dp/B008GRTSV6/ref=sr_1_1?ie=UTF8&qid=1477773079&sr=8-1&keywords=arduino+uno
1 × GRA & AFCH brand NCS314 Adruino Shield with IN-14 x 6 included http://www.ebay.com/itm/Nixie-Tubes-Clock-Arduino-Shield-NCS314-for-xUSSR-IN-14-Nixie-Tubes-WITH-TUBES-/162198121548?hash=item25c3c2ec4c:g:JgUAAOSwAuZX6W87
1 × DC 12V @ 2000mA power cable and supply Center Pin Positive
2 × Texas Instruments Ll293D H-Bridge Driver to control Bed Vibrator (also sold under different names depending on distributor)
2 × 5.5x2.1mm Breadboard Jack Connector https://www.sparkfun.com/products/10811
1 × Adafruit DS1307 Real Time Clock Breakout Board Kit Instead of using NTP Time, this module keeps time accurately on the Pi (even at power failure)
1 × Elegoo MB-102 Breadboard Needed a larger breadboard to wire the circuit for this project.
1 × Canakit RPI GPIO breakout Kit https://www.amazon.com/gp/product/B011CZ2LEY/ref=s9_acsd_al_bw_c_x_3_w
1 × Plugable USB Audio Adapter with 3.5mm Speaker/Headphone and Microphone Jacks (C-Media HS 100B Chip) Built in AUX output on the Pi was horrendous.
1 × Spare barrel size (5.5mm x 2.1 mm) plug strip down to circular plug end and the wire portion to connect nixie clock to breadboard