Paul Gould-
How to draw Cycloidal Gears in Inventor using Parameters and Equations
04/26/2021 at 17:22 • 0 comments -
Inline Timing Belt reduction with internal NEMA17
04/25/2021 at 12:43 • 0 comments -
NEMA17 Dual Stage Timing Belt Reduction
04/04/2021 at 15:33 • 0 comments -
More Cycloidal Gearboxes
03/15/2021 at 17:25 • 3 comments -
3D Printed Bearing - Proof of Concept
02/27/2021 at 17:53 • 1 comment -
Slim Cycloidal gearbox with the BLDC motor in the middle
02/21/2021 at 17:48 • 0 comments41:1 Dual Disk, Single stage
27mm x 102dia QM4208 motor, 6809 Bearing -
Capstan Drive with NEMA17 and Timing belt
02/03/2021 at 15:25 • 3 comments -
Dual Linked Two stage Cycloidal Gearbox 3D Printed NEMA17
01/04/2021 at 12:51 • 0 comments -
More Actuator Research
12/12/2020 at 10:43 • 1 comment -
Concentric Magnetic Gearboxes
10/11/2020 at 14:13 • 2 commentsBefore Cycloidal Gearboxes, I research Concentric Magneti Gearboxes.
I made an improvement on the current design by drastically reducing the flux path length and hence increasing the torque handling ability.
![]()
standard flux path
![]()
New flux path
3D Printed Robot Actuator
A high speed and high torque robotic actuator using low-cost brushless motors, custom controller, 3D printed parts and bearings.
