Audio Amplifier with Visualizer

So here it is in its breadboard beauty:

There is one difference: I added a 100nF cap between the input and potentiometer:

And I am a broke student so my... wiring... is interesting, to say the least. I need to just get a breadboardable aux input:

Oof. And now to the results! It gets loud. I only had one aux cord around, so I had to test it with my headphones. RIP. I used my scope to show the amplification:

Very Nice. Only one problem. It's extremely noisy. The eternal hiss is very much present along with this weird blip:
The hiss is probably a mix of my fantastic washi tape wiring and headphone use, but the blip is probably coming from the power supply. I will eventually use a better supply, but I'd like to make it work decently even with a mediocre voltage source. I'm researching it, but haven't come up with any good solutions yet.

So here is my LTspice schematic:

Note that R4 is a pot and there is another pot right after Vin. I simulated a 0.1 V sine wave and got this:
NICE. All the parts came in now, so onto the building!

Some of the parts came in, should be ready to start building soon.