Quantity   Component name
1 × DragonBoard 410C The main SoC board
1 × Arduino NodeMCU The arduino with the ESP 8266 module or any other WiFI enable arduino with at least 13 GPIO ports
1 × SD Memory card 32 GB will do. To be inserted in the DragonBoard
1 × Pack of bateries (2000 mAPH and 12V) Required to power up the DragonBoard
20 × Parallel crystal wires
1 × A RFID reader model RC522 (MiFare)
8 × RFID tags (Mifare)
8 × Small push buttons
8 × LEDs with different colors
6 × 330 Ohm resistors
5 × Brown TNT fabric 5 square meters of this fabric to build the vest. Or adapt an existing one
1 × Velcro adhesive tape One meter is enough
1 × USB speaker