Quantity   Component name
1 × Thorlabs MB8 Aluminum Breadboard 8" x 8" x 1/2", 1/4"-20 Taps
2 × Thorlabs PH1 Ø1/2" Post Holder, Spring-Loaded Hex-Locking Thumbscrew, L = 1"
10 × McMaster-Carr 93330A541 Female Threaded Round Standoff Aluminum, 1/4" OD, 3" Long, 4-40 Thread Size
10 × McMaster-Carr 90176A102 Nylon Unthreaded Spacers (for 4-40 sized screws)
32 × McMaster-Carr 91772A112 Passivated 18-8 Stainless Steel Pan Head Phillips Screw 4-40 Thread, 5/8" Long (32 screws not 32 packs!)
1 × McMaster-Carr 5911K21 Lightweight Linear Motion Shaft, Anodized 6061 Aluminum, 1/4" Diameter, 12" Long
2 × McMaster-Carr 3759T57 Precision Stainless Steel Ball Bearing, Shielded, Trade No. R188-2Z, 13000 rpm Maximum Speed
1 × McMaster-Carr 85585K15 Clear Polycarbonate Film, Glossy x Glossy, 24" x 24" x 0.02"
1 × McMaster-Carr 1518T13 Mirrored Acrylic Sheet, 6" x 24" x 1/8"
2 × Mcmaster-Carr 8560K257 Clear Cast Acrylic Sheet, 12" x 24" x 1/8" (or any 1/8" acrylic - color doesn't matter)
2 × Mcmaster-Carr 8560K355 Clear Scratch- and UV-Resistant Cast Acrylic Sheet 12" x 24" x 1/4" (or any 1/4" acrylic - color doesn't matter)
1 × Scigrip acrylic adhesive #4
1 × Silicone sheet, .015" thickness We used the "Silicone Sheet in Continuous Rolls" available from Stockwell Elastomerics: https://www.stockwell.com/solid-silicone-sheet/
2 × Pololu 1993 Universal Aluminum Mounting Hub for 1/4? (6.35mm) Shaft, #4-40 Holes
2 × Thorlabs TR4 Ø1/2" Optical Post, SS, 8-32 Setscrew, 1/4"-20 Tap, L = 4"
2 × Thorlabs RA180 Right-Angle End Clamp for Ø1/2" Posts, 1/4"-20 Stud and 3/16" Hex
2 × Thorlabs AM45T 45° Angle Block, 8-32 Tap, 8-32 Post Mount
2 × Thorlabs TR2 Ø1/2" Optical Post, SS, 8-32 Setscrew, 1/4"-20 Tap, L = 2"
2 × Thorlabs PH3 Ø1/2" Post Holder, Spring-Loaded Hex-Locking Thumbscrew, L = 3"
2 × McMaster-Carr 90279A191 screws, 8-32 Thread Size, 5/16" Long