Close
0%
0%

Supercon: Environmental Robotics BioBlitz!

Bowie at Supercon '18! Join us to use the robot to clean up the park, then perform environmental sensor data analysis

ekEK
Following
Liked Like project

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

Pick an awesome username
hackaday.io/
Your profile's URL: hackaday.io/username. Max 25 alphanumeric characters.
Pick a few interests
Projects that share your interests
People that share your interests

We found and based on your interests.

Choose more interests.

OK, I'm done! Skip
Similar projects worth following
9 comments
726 followers
View Gallery
Supercon workshop on Sunday morning - get your tickets! You will learn hands-on how the robot operates, and the various sub-systems involved to make it work.

ENVIRONMENTAL ROBOTICS BIOBLITZ!

Our environment is facing challenges, especially with the increase of pollution. We as makers and hackers can help mitigate this! Join us as we use a robot to clean a nearby park of litter. The robot will use its arm to pick up any litter while logging air quality and imagery data mapped to GPS coordinates. In this workshop you will learn hands-on how the robot operations. We will then head inside and perform data analysis to gather insights and share. 

SUNDAY MORNING - GET TICKETS HERE

MISSION: BOWIE REPLICATION

Bowie consists of over 100+ 3D printed pieces. We need your help to bring pieces of Bowie to Supercon, where it will all come together. More details here

  • MISSION: BOWIE REPLICATION

    EK • 10/13/2018 at 16:33 • 0 comments

    Bowie consists of over 100+ 3D printed pieces. We need your help to bring pieces of Bowie to Supercon, where it will all come together. If you are going to Supercon and have a 3D printer, leave a comment on this page here and we'll get started by adding you to the chat

    3D Printer requirements:

    - print PLA

    - 0.4mm max diameter nozzle

    - build volume of at minimum 120mm^3

    - are willing to donate ~500g of filament and 4-8h of print time

    Bring your pieces to Supercon, and we'll assemble the robot on Friday and Saturday evening (somewhere at Supercon). Then we'll have the robot rolling in time for the workshop on Sunday morning.

    Hackaday community, we'd super appreciate your help to make this come together! This will be quite an experiment. Possibly the first globally replicated 3D printed robot?

    LET'S GO BUILD BOWIE TOGETHER! :)

View project log

Enjoy this project?

Share

Discussions

rob wrote 10/20/2018 at 16:44 • point

You can put me on the list.

  Are you sure? yes | no

Eric Moyer wrote 10/19/2018 at 01:35 • point

Add me to the list.

  Are you sure? yes | no

EK wrote 10/19/2018 at 02:47 • point

Super Eric! Added you to the chat. Any idea as to how many pieces you'd be willing to print? Thank you!

  Are you sure? yes | no

mbuhrley wrote 10/18/2018 at 19:06 • point

I can print a piece or two

  Are you sure? yes | no

EK wrote 10/19/2018 at 02:46 • point

Yes! Great! Invited you to the chat and will let you know the pieces

  Are you sure? yes | no

Evan Juras wrote 10/16/2018 at 04:14 • point

Hey Erin, I'd be able to print a few pieces!

  Are you sure? yes | no

EK wrote 10/16/2018 at 11:31 • point

Wooooot! Thanks Evan! Added you to the chat and will let you know the pieces

  Are you sure? yes | no

zakqwy wrote 10/13/2018 at 23:26 • point

I'm in! My Rostock has been a bit finicky as of late but I'm happy to contribute if I can.

  Are you sure? yes | no

EK wrote 10/16/2018 at 02:58 • point

Wooooo! Thank you Zach! You're the first one! I'll add you to the chat and we'll get started

  Are you sure? yes | no

Similar Projects

3D printed Delta robot
Project Owner Contributor

Delta robot

oliveiraOliveira

The very first interactive version of Makey the robot! that can walk and dance like #OttoDIY
Project Owner Contributor

Makey dancing robot of the Maker Faire

camilo-parra-palacioCamilo Parra Palacio

Pole climbing robot with applications in maintenance, surveillance, and IoT, mostly 3D printed
Project Owner Contributor

Pole climbing robot (still in development)

ap-techap-tech

SPROUT is a robot from the online game Brawl Stars. It balances on two wheels, can lift its arm and it can be controlled from a smart phone.
Project Owner Contributor

SPROUT! (Brawl Stars)

bingobricksBINGOBRICKS

Does this project spark your interest?

Become a member to follow this project and never miss any updates

By using our website and services, you expressly agree to the placement of our performance, functionality, and advertising cookies. Learn More

Yes, delete it Cancel

Report project as inappropriate

You are about to report the project "Supercon: Environmental Robotics BioBlitz!", please tell us the reason.

Send message

Your application has been submitted.

Remove Member

Are you sure you want to remove yourself as a member for this project?

Project owner will be notified upon removal.