supercon_bezel.cdr

Bezel which should be glued to the back of the bezel, to protect components from your fingers. The best material is transparent acrylic, 4 or 5 mm thick. This file is in CorelDraw Version 11, which is compatible with most laser cutters.

cdr - 23.89 kB - 11/07/2018 at 23:29

Download

Proto Board 2018 Outputs.zip

Gerber files and PCB file (CircuitStudio) for the proto PCB

x-zip-compressed - 1.33 MB - 10/23/2018 at 23:38

Download

Supercon 2018 Badge Outputs.zip

Gerber files and PCB file (CircuitStudio) for the main badge PCB

x-zip-compressed - 2.52 MB - 10/23/2018 at 23:38

Download

LIS3DH.pdf

LIS3DH accelerometer (16-bit reading)

Adobe Portable Document Format - 682.96 kB - 10/23/2018 at 22:59

Preview

LIS3DE.pdf

LIS3DE accelerometer (8-bit reading)

Adobe Portable Document Format - 1.01 MB - 10/23/2018 at 22:59

Preview

16 MBit Flash Storage - Microchip SST26VF016B.pdf

Adobe Portable Document Format - 2.89 MB - 10/18/2018 at 05:50

Preview

LCD Controller - Sitronix ST7789V.pdf

Adobe Portable Document Format - 3.05 MB - 10/18/2018 at 05:50

Preview

CPU - Microchip PIC32MX370.pdf

Adobe Portable Document Format - 4.12 MB - 10/18/2018 at 05:50

Preview

Audio Amplifier - TI LM4890.pdf

Adobe Portable Document Format - 1.95 MB - 10/18/2018 at 05:50

Preview

LCD Module - Newhaven NHD-2.4-240320CF-CTXI-F.pdf

Adobe Portable Document Format - 696.96 kB - 10/18/2018 at 05:50

Preview