ATTENTION: SuperCon AddOn

Description

Recently I've found myself fascinated by the AT firmware provided by Espressif. Originally I believe it's purpose was to give easy control of the ESP8266 long before it supported Arduino. Now with robust support for Arduino available on both the 8266 and the ESP32 there doesn't seem to be a great need for it. Yet Espressif actively maintains it, even adding support for BLE on ESP32.

BASIC was the first language I even programmed using my older brothers Tandy 1000. The first time I connected to another computer was using a Hayes 2400 modem, typing in half-learned half-guessed AT commands. I think this experience should be remembered at SuperCon 2018.

Using the ESP32 AT Firmware I believe this classic experience can be relived. This badges addon hardware will be as minimal as possible, likely consisting of just a WROOM module and header. The fun will be in the software.

Project Logs

Collapse

Wait.... SuperCon is *this* weekend?!?
morgan • 11/01/2018 at 02:07 • 2 comments

That was me on Monday evening.
Thankfully @oshpark had been ordered already but with an entire week up and vanishing I was concerned I maybe should have ordered expedited service.... Anyhow, I put in my @Digi-Key order right away and it arrived today! Got the ESP32 modules and headers. As long as USPS doesn't pull any funny stuff OSHPark should arrive tomorrow!
Boards ordered!
morgan • 10/18/2018 at 20:22 • 0 comments

Welp, I *hope* this boards are simple enough even I cannot screw it up(tm) because the order is in place.

I've ordered 18 boards and will bring parts for 10 or so, will know sometime next week what I can swing.
I'm interested in hearing ideas for uses. Obvious one for me is using the BLE Serial Port Profile for badge to badge communication. Unfortunately it doesn't appear any of the WiFi Mesh functionality has been implemented in the AT firmware. But in Station Mode a fairly trivial service could be written for multi-badge comms. Let me know what you'd use one for.
Tight timeline...
morgan • 10/17/2018 at 21:09 • 0 comments
With SuperCon in.... just over 3 weeks I don't have a ton of time to get this slapped together.
Things I need.
- PCB (OSHPark)
- WROOM module (digikey)
- Connectors..... (digikey? I hope)
First two are easy, just get the PCB design done and order boards ASAP. I'm out of town for the next 4 days, so I'm reaaallly hoping I can do that tonight before I leave. We'll see.
ESP32 modules can order anytime next week and have room to spare.
But that last one is proving tricky... The requirements for the socket are as follows.
- 2.54mm
- Horizontal
- SMD
- Break-away?
Best I've found so far is this 10 pin socket header that I could cut/melt one pin off.
https://www.digikey.com/product-detail/en/M20-7911042R/952-3201-1-ND/6559314/
Besides having to modify them, they're aren't very cheap. I'm going to mull over the footprint this afternoon, if I can make that generic enough, I can send the boards out and figure this out next week.

View all 3 project logs

Discussions

zakqwy wrote 11/08/2018 at 15:42

ya'll are some BOSSES! also your presentation was _excellent_ on stage. <3

Are you sure? yes | no

Melissa LeBlanc-Williams wrote 11/07/2018 at 22:49

Congratulation on winning the Software Category with this and thanks for letting me be a part of the On Stage Demo. It was a lot of fun.

Are you sure? yes | no

morgan wrote 11/07/2018 at 23:05

Thanks and thank you for participating! Enjoy hacking on the esp32

Are you sure? yes | no

Roger wrote 11/05/2018 at 06:43

So happy to see you guys pulled it all together with time to spare for the stage demo!

And if I may suggest: tag this project with "SuperCon" so it shows up on https://hackaday.io/projects?tag=SuperCon&sort=date

Are you sure? yes | no

QuantumStar wrote 10/26/2018 at 00:26

This is really neat! I think the thing I'd like to see is the ability to create a basic 'card' with people's information on it so you can quickly share contact details when you meet new people at the conference. Of course, a lot of people would have to have them for this to work well, but, it would be a fun use for it I think. Also, maybe the ability to add your email address, and other people would add theirs, and before the conference you could add a list of contacts, and the badge could react if you are within 10 feet of someone on that list, so you wouldn't miss saying hi to someone.

Are you sure? yes | no

AVR wrote 10/17/2018 at 20:46

love the idea behind this!, happen to be using my lib ?

Are you sure? yes | no

morgan wrote 10/17/2018 at 21:15

Nice! I've been using it for a couple projects now. Think this will be "first to print"

Are you sure? yes | no

ATTENTION: SuperCon AddOn

Description

Project Logs

Collapse

Wait.... SuperCon is this weekend?!?

Boards ordered!

Tight timeline...

Discussions

Similar Projects

ESP8266 Arduino Tutorials

Mirobot - WiFi robotics kits for kids

ESP8266 SDK Tutorials

ESP8266 Lua Tutorials

ATTENTION: SuperCon AddOn

Become a Hackaday.io member

Just one more thing

Description

Project Logs Collapse

Enjoy this project?

Discussions

Become a Hackaday.io Member

Similar Projects

Does this project spark your interest?

Report project as inappropriate

Send message

Remove Member

Project Logs

Collapse