PCB - 3D Startrek Enterprise

Just LED and resistors :)

With power, very nice desktop lamp

To easy setup firmware I created simple batch to set fuses and upload code for Attiny85

• just run enterprise_upload.bat

avrdude -C ./avrdude.conf -v -p attiny85 -c usbasp -P usb -e
avrdude -C ./avrdude.conf -v -p attiny85 -c usbasp -P usb -U lfuse:w:0xc2:m -U hfuse:w:0xdf:m -U efuse:w:0xfe:m
avrdude -C ./avrdude.conf -v -p attiny85 -c usbasp -P usb  -i 100  -Uflash:w:enterprise.hex:i

NOTE:

• you ordering 10pcs ... chose white boards!
• YOU RECEIVE 10-12pcs USS enterprise it is small army ;)
• 10 space ships with one order !!!
• http://dirtypcbs.com/store/designer/details/bobricius/6291/enterprise-zip
• assembly by pictures
• you can use leds as you want

lets go to make some blinky software ;)

maybe it is big fail and lost, but I am very exited and I can not wait longer and I can not focus on longer development. Maybe I mixed 2-3 blueprints or more spaceships, I am not Startrek expert, just watcher.

There is lot of space for improvements ....