Project Logs

Collapse

• I had to replace the auger again because it broke. But it's nice to be able to print spare parts whenever you need them.

  stefan.schnitzer • 09/29/2024 at 04:45 • 0 comments

• Maintenance & Cleaning

  stefan.schnitzer • 11/18/2023 at 16:12 • 0 comments

  After several years of good use, it needs some cleaning and little repairs. And I want to test a new auger type...

• I took some time to clean up the 3D model...

  stefan.schnitzer • 01/15/2023 at 18:18 • 0 comments

  Since the feeder is still working fine, I took some time to clean up the 3D model.

• still works...

  stefan.schnitzer • 12/24/2021 at 21:08 • 0 comments

• After one year of use, I had to replace the auger.

  stefan.schnitzer • 09/06/2020 at 06:34 • 0 comments

  After one year of use, I had to replace the auger. 

  The new auger is printed in PTEG.
  

• I found some time to sketch up the electronic schematics:​

  stefan.schnitzer • 10/19/2019 at 07:00 • 0 comments

  I found some time to sketch up the electronic schematics: (please tell me if I made mistakes)

• get a notification if the cat is eating

  stefan.schnitzer • 10/02/2019 at 06:01 • 0 comments

  I made a flow on nodered that sends me a notification with a snapshot of an IP-cam when my cat is eating. (or when food gets refilled)

  If the measured weight is in- or decreased by ≥5g a notification gets triggered...
  

  ...actual screenshot from my smartphone:
  (I blurred out the image to protect my cats privacy ;) )

View all 7 project logs