Quantity   Component name
1 × Nvidia Jetson Nano development board.
1 × Noctula fan nf a4x20 5v pwm.
1 × ​RS PRO Panel Mount, Version 2.0 USB Connector, Receptacle https://uk.rs-online.com/web/p/products/8621579/
1 × Dragino LoRa GPS hat (currently for Pi 4 only) https://wiki.dragino.com/index.php?title=Lora/GPS_HAT
1 × Waterproof case Max 004. http://www.max-case.co.uk/store/p13/max004v.html
1 × UltraMic 384 usb microphone. Dodotronics https://www.dodotronic.com/product/ultramic-384k-ble/?v=79cba1185463
1 × 5 Inch EDID Capacitive Touch Screen 800x480 HDMI Monitor TFT LCD Display. If you are using Raspberry Pi, you can change resolution by this steps: Login to your Raspberry Pi and edit /boot/config.txt file, make sure it has following parameter: framebuffer_width=800 framebuffer_height=480 hdmi_force_hotplug=1 hdmi_group=2 hdmi_mode=87 hdmi_cvt 800 480 60 6 0 0 0 Save it and reboot your system.
1 × EVM3683-7-QN-01A Evaluation Board for supplying a steady 5v to the Nano. https://www.monolithicpower.com/en/evm3683-7-qn-01a.html
1 × ADC Pi shield for sensing battery and supply voltages. AB Electronics
1 × 3.3 K wired resister.
1 × 48.1 K wired resistor.
1 × 270 0805 SMD resistor, ±0.1% 0.125W https://uk.rs-online.com/web/p/products/0566923/
1 × Stontronics T6380ST. https://uk.rs-online.com/web/p/desktop-power-supplies/1262122 medical grade 5v power supply for Jetson Nano