0%

0%

Voron Switchwire 3D Printer

Voron Switchwire - DarekNorway Build Log

Following Follow project

Liked Like project

Become a Hackaday.io member

OR

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

OK, I'm done! Skip

Similar projects worth following

Description

My Voron Switchwire build log is updated here on HackaDay My Voron 2.4 V2.601 3D Printer build log is updated on Thingiverse: https://www.thingiverse.com/thing:4240260

Details

Voron Switchwire GitHub >>> https://github.com/VoronDesign/Voron-Switchwire

Files

Enclosure Vorender5 v20.png Portable Network Graphics (PNG) - 69.25 kB - 02/16/2023 at 23:10		Preview

VSW_Feed_Slot_Clamp_Top.stl https://hackaday.io/project/174810-voron-switchwire-3d-printer/log/200085-voron-switchwire-upgrade-feed-slot-clamp Standard Tesselated Geometry - 1.33 MB - 11/06/2021 at 13:42		Download
VSW_Feed_Slot_Clamp_Bottom_3mm_3mm.stl https://hackaday.io/project/174810-voron-switchwire-3d-printer/log/200085-voron-switchwire-upgrade-feed-slot-clamp Standard Tesselated Geometry - 44.51 kB - 11/06/2021 at 13:42		Download
VSW_Feed_Slot_Clamp_Bottom_4mm_3mm.stl https://hackaday.io/project/174810-voron-switchwire-3d-printer/log/200085-voron-switchwire-upgrade-feed-slot-clamp Standard Tesselated Geometry - 66.21 kB - 11/06/2021 at 13:42		Download
acrilic_enclosure_side_walls_support_v2_x2.stl Standard Tesselated Geometry - 113.95 kB - 03/14/2021 at 15:55		Download

View all 13 files

Components

1 × Doble-Sided Tape Double-sided adhesive 0.5mm thick black foam 20mm tape
1 × Raspberry Pi 4 Power Cable Raspberry pi 4 power switch line type-c interface 5V 3A USB power supply
1 × Dragon Hotend TiangleLab Dragon Hotend V2.0 High Flow
100 × Brass Hot Melt Inset Nuts M3 X D5.0 X L4.0 Brass Hot Melt Inset Nuts Heating Molding Copper Thread Inserts Nut SL-type Double Twill Knurled Injection Brass Nut
1 × BMG Extruder Componnets Kit Trianglelab BMG Direct Drive Basic kit

View all 54 components

Project Logs

Collapse

Voron Switchwire Upgrade - 4mm Glass Enclosure
DarekNorway • 11/14/2021 at 13:15 • 0 comments

I have used double-sided adhesive 0.5mm thick black foam 20mm tape to stick the 3D printed hinges to the glass panels enclosure.
Voron Switchwire Upgrade - Feed Slot Clamp
DarekNorway • 11/06/2021 at 13:40 • 0 comments

Fasteners i have used:

2x M3x12mm Screw Bots and 2x Brass Hot Melt Inset Nuts M3 X D5.0 X L4.0
STL files you can find on my thingiverse https://www.thingiverse.com/thing:5100443/files
Voron Switchwire Upgrade - Side Walls Supports
DarekNorway • 03/15/2021 at 12:57 • 0 comments

Voron Switchwire Upgrade - Acrylic side walls with additional inside supports
Voron Switchwire Upgrade - Side Walls Supports file to print: https://cdn.hackaday.io/files/1748107479071040/acrilic_enclosure_side_walls_support_v2_x2.stl

https://hackaday.io/project/174810/components
Voron Switchwire Enclosure
DarekNorway • 03/13/2021 at 15:48 • 0 comments

Voron Switchwire Enclosure made from 3mm Acrylic PMMA and 3mm Aluminium Composite Panels.

https://hackaday.io/project/174810/components
Voron Switchwire - Y-axis Sensorless Homing - TMC2209
DarekNorway • 02/05/2021 at 17:32 • 0 comments

Voron Switchwire - Y-axis Sensorless Homing - TMC2209, G28.

X axis - Microswitch Endstop
Y axis - Sensorless (TMC2209 Stepper Motor Driver Virtual Endstop)
Z axis - Inductive Probe
BTT SKR mini E3 V2.0 + Raspberry Pi4 8GB + Octoprint + Octopi + Klipper

printer.cfg

...

[stepper_y]
step_pin: PB10
dir_pin: !PB2
enable_pin: !PB11
step_distance: 0.0125

###Sensorless Homing
#endstop_pin: ^PC1
endstop_pin: tmc2209_stepper_y:virtual_endstop
homing_retract_dist: 0
###End Sensorless Homing

position_endstop: 227
position_min: 0
position_max: 227
homing_speed: 70
homing_positive_dir: true

[tmc2209 stepper_y]
uart_pin: PC11
tx_pin: PC10
uart_address: 2
microsteps: 16
run_current: 0.5
hold_current: 0.3
interpolate: True
stealthchop_threshold: 250

###Sensorless Homing
diag_pin: ^PC1
driver_SGTHRS: 170
###End Sensorless Homing
https://hackaday.io/project/174810/components
04.02.2021 - Voron Switchwire - Filament Holder and LCD Screen
DarekNorway • 02/04/2021 at 12:05 • 0 comments

Voron Switchwire - 3D Printed Filament Holder (with a piece of 4/1.75 mm PTFE Bowden Tube)

3D Printed Enclosure for Fystec - MINI12864 LCD Display Screen

Voron Switchwire 3D Printed Parts STL files: https://github.com/VoronDesign/Voron-Switchwire/tree/master/STL
Voron Switchwire - First Print
DarekNorway • 02/04/2021 at 11:24 • 0 comments

Voron Switchwire - PLA Spiral Vase Mode Printing

Components: https://hackaday.io/project/174810/components
Voron Switchwire - Homing, G28
DarekNorway • 01/31/2021 at 13:15 • 0 comments

Voron Switchwire - Homing XYZ

BTT SKR mini E3 V2.0 + Raspberry Pi4 8GB + Octoprint + Octopi + Klipper

https://hackaday.io/project/174810/components
31.01.2021 - Voron Switchwire - BTT SKR mini E3 Wiring and Crimping
DarekNorway • 01/31/2021 at 12:29 • 0 comments

https://hackaday.io/project/174810/components
24.01.2021 - Voron Switchwire - Power Supply Wiring and Crimping
DarekNorway • 01/24/2021 at 11:29 • 0 comments

Voron Switchwire - Power Supply Wiring 230VAC, 24VDC, 12VDC, 5VDC

OV DC (-)Pin of 24V PSU and 0V DC(-)Pi of 12V tied together to control both 24V and 12V devices using SKR mini E3 Board v2.0 connected to 24VDC PSU

230VAC splicing connectors - Wago 221-615, 5x 0.5...6mm2 (20...10AWG)

24V DC (+Pin) splicing connector - Wago 221-415, 5x 0.2...4mm2 (24...12AWG)

Raspberry Pi 4 Power Cable USB To Type-C Charging Wire ON/OFF Switch

https://hackaday.io/project/174810-voron-switchwire-3d-printer#menu-components

View all 41 project logs

Discussions

Ivan Stepaniuk wrote 01/19/2021 at 14:40

Nice! Are you happy with the results in terms of print quality?

Are you sure? yes | no

Similar Projects

Jubilee all metal build

Low/zero cost upgrades for the Monoprice Select Mini 3D Printer.

Monoprice Select Mini Maximum 3D Printer Mods

us-water-rockets U.S. Water Rockets

Attempt to dive into 3D printing

3D Printer

The z-axis of my new Cetus 3D printer just plummets down when the power goes off. I want to fix that.

Cetus z axis fall stop

lukas-koch-aka-ast Lukas Koch aka Ast