Quantity   Component name
1 × Dusty 3D Printer
1 × Screwdriver (PH 0, slotted), pliers, side cutter, hex key, Cordless screwdriver with a 3mm metal or PVC drill bit. You will need these tools for the printer modification.
3 × Guitar pick in various thicknesses
1 × Screw with matching nut slightly longer than the length of a heater cartridge, and washer, if necessary.
1 × Cotton swab and wooden or metal sticks if necessary
3 × Clips or clamps in different sizes and Powerstrips if necessary
1 × Twine or string. if necessary
1 × Screwdriver PH 0, Drill, Ruler or tape measure Tools for the ZIther construction
1 × 15mm Forstner drill bit, Flat and round files, Chisel, Jigsaw, Side Cutter Tools for the Zither pickups :
1 × Top: 8 mm wood drill, Bottom:10 mm wood drill, round file, 12 mm Forstner drill, Soldering station and soldering iron Tools for the tuner set and guitar jack socket (Zither)
1 × Light wooden board Measurements: 52 x 15 x 1.8 cm
1 × Guitar jack socket
2 × single-coil pickups (preferably both with chrome-plated caps)
4 × electric guitar bridges (hardtail bridge)
2 × tuner sets
4 × electric guitar string sets spare parts included
1 × MIDI Controller Extra
1 × Joystick Extra