Quantity   Component name
1 × Raspberry Pi Zero W
1 × 8 channel 3.3v Relay
1 × Momentary Button
4 × M5 14mm Screws
8 × Nylon screws + nuts for mounting electronics then being able to clip with side cutters to shorten. Nuts can be used on the underside of the boards to lift them up slightly so the pins dont scratch the acrylic and it sits evenly)
1 × SD Card
1 × 5.2v 2.5A Raspberry Pi compatible Power Supply
1 × 8 x 1 Pin Header For crimped wires to the relay board
1 × 20 x 2 Pin Header For crimped wires to the raspberry pi