RetroVGA - Raspbery Pico multi retro computer

Description

FEATURES:
- Smallest as possibly 100x100mm
- Absolute minimum components.
- QWERTY keyboard
- Access to boot button
- flashing MCUME logo with internal led.
- VGA output
- Piezo Speaker
- Reset button
- power switch controlling internal buck-boost
- micro SD card
- 9pin DSUB ATARI joystick connector (you need reduce cable to cca 30cm)

Details

Universal retro computer emulator based on Raspberry Pi PICO

This board can run retro computer machine emulator MCUME
and is also compatible with Miroslav Nemecek PicoVGA

Required components

Component	Pcs	Description	Note
Raspberry PICO	1	main green board	-
DTS63K	37	tactile switch 7mm height, 1N	Or another 1N force is very comfortable to press
2K 0603/ 0805/ TH Ø1.8x3.2mm	2	Resistor	for VGA
1K 0603/ 0805/ TH Ø1.8x3.2mm	2	Resistor	for VGA
470R 0603/ 0805/ TH Ø1.8x3.2mm	2	Resistor	for VGA
820R 0603/ 0805/ TH Ø1.8x3.2mm	1	Resistor	for VGA
390R 0603/ 0805/ TH Ø1.8x3.2mm	1	Resistor	for VGA
82R 0603/ 0805/ TH Ø1.8x3.2mm	1	Resistor	for VGA
DSUB15 FEMALE	1	Connector Female	for VGA monitor
DSUB9 MALE	1	Connector Male	for Joystick
SD card SMD	1		micro SD car reader
LD-PZPN-3510	1	PIEZO	PIEZO sound beeper or another
JS202011CQN C&K or MSS-2235 NINIGI	1	Side Switch	For power off (RetroVGA work without)

MCUME emulators are very basic, no save state,
no configuration, only select games from card.

Not all games works, there can be some screen issues, flashing sprites, freezes, unexpected resets

Game console systems supported:

Atari 2600
Odyssey/Videopac
Colecovision
Atari 5200

Computer systems supported:

Zx81
Zx spectrum
Atari 800
C64

Discussions

pgibson wrote 04/07/2023 at 03:53

Which uSD card socket was used in the design? I had a similar one but I can't get it to work so need to order the right one.

Are you sure? yes | no

Mark pepper wrote 09/04/2022 at 13:50

Is there a schematic anywhere please? I just get no VGA out of my build and I'm trying to figure out why.

Are you sure? yes | no

olivierBautista wrote 05/09/2022 at 21:07

hello, is there not a capacitor on the back of the sd card reader?

100 nF 250 V 0805 ?

Are you sure? yes | no

bobricius wrote 05/09/2022 at 21:30

Working without, you can add lower voltage capacitor

Are you sure? yes | no

olivierBautista wrote 05/09/2022 at 22:18

OK thanks have a nice day

Are you sure? yes | no

stefexec wrote 04/30/2022 at 12:36

Can you please restock or release schematics for people to recreate it?

Are you sure? yes | no

bobricius wrote 05/09/2022 at 21:31

soon, 1-2 weeks

Are you sure? yes | no

danjovic wrote 02/06/2022 at 18:06

Oh at first glance it looked to me that the computer graphic at cover PCB had one of those tiny 128x96 OLED displays , lol!

Are you sure? yes | no

danjovic wrote 02/06/2022 at 18:05

Cool form factor you have created, with the keyboard and cover layer. It should work nicely for a Zero W too.

Are you sure? yes | no

Julo Jenis wrote 01/20/2022 at 08:50

Which youstick are you using?

Are you sure? yes | no

bobricius wrote 02/06/2022 at 16:30

something from aliexpress

Are you sure? yes | no

RetroVGA - Raspbery Pico multi retro computer

Description

Details

Required components

Discussions

Similar Projects

Interak Computer Restoration

ESP32 VGA PS/2

Fake NES Classic Edition Teardown

μRetro game console with CPU on fake μSD cards

RetroVGA - Raspbery Pico multi retro computer

Become a Hackaday.io member

Just one more thing

Description

Details

Required components

Enjoy this project?

Discussions

Become a Hackaday.io Member

Similar Projects

Interak Computer Restoration

ESP32 VGA PS/2

Fake NES Classic Edition Teardown

μRetro game console with CPU on fake μSD cards

Does this project spark your interest?

Report project as inappropriate

Send message

Remove Member