For the assembly instructions of the Open CPV Solar Tracker Controller based on breakout boards see assembly and operating instructions in 2021_08_14_Full_description.pdf.

The Assembly of the all in one board "Magnetic CPV Tracker v2 0f" should be done by a professional assembly company. You will find all required files for ordering at:

Magnetic_CPV_Tracker_v2_0f_Eagle_CAD_CAM_BOM_documentation.zip

 A detailed assembly and operation manual as well as the final design of the pogo pin test board will follow. The remaining assembly steps for an waterproof unit will be:

1. Prepare an aluminum plate with a shading beam and through holes for the LED photo diodes.
2. Test the board or get one of the tested boards from us.
3. Mount the board on the aluminum plate with silicone as heat transfer agent and encapsulant.
4. Connect the wires to the 12-36V DC supply, motors and RS485 communication.
5. Cover it all with silicone to get a hermetic package without air inclusions.

The operation of Magnetic CPV Tracker v2 0f will be very similar to the breakout board version so refer to 2021_08_14_Full_description.pdf for a preview.