Quantity   Component name
1 × PETG orange Filament
1 × Ender CE3 3d printer
1 × Teensy 4.1 arm based micro processor, uses Arduino IDE for coding
1 × Micro SD card for recording flight data
1 × MG90S Metal toothed servos, slightly larger footprint than plastic SG90s but has better construction
1 × PCA 9685 Servo controller this will drive our servos using the battery pack instead of through the micro controller
1 × on/off switch
1 × 5v buck converter needed for a 5v bus to power the servos and teensy
1 × MPU 6050 allows us to get an angular measurement to stimulate the PID loop
1 × misc screws
1 × Estes E12-6 rocket motor can be found at hobby shops
1 × parachute / parachute chord / parachute wadding can be found at hobby shops
1 × rocket motor igniter can be found at hobby shops