Quantity   Component name
1 × Bell & Howell IMD-202-2 multi-meter Case, nixie tubes, 7441 decoder/drivers, power supply, and power cord. Used for the lab blue crinkle paint dice towers
1 × Sears Silvertone Solid State Radio model 6004 Burnt orange case, speaker, knob, and potentiometer with on/off switch
1 × Sears Silvertone Solid State Radio model 7004 Ivory/Blue case, speaker, knob, and potentiometer with on/off switch
1 × Heathkit HD-16 Code Oscillator Two tone olive green case, speaker, on/off switch
1 × Wildlife Materials Inc. TRX-1000S PLL Synthesized Tracking Receiver Blue case with handle
1 × Admiral 1960's tube radio Sea foam green case, speaker, knob, and potentiometer with on/off switch
1 × Microchip Atmega329P micro-controller 28 pin dip package
1 × Small 8 ohm speaker Audio output
1 × Mini PAM8403 Digital Power Amplifier Board Amplifier for the sound
1 × KY-040 Rotary Encoder Module Rotary encoder selectors for dice count and dice type
1 × Adafruit 5 way switch Dice count (up/down), Dice type (right/left), Roll (down)
1 × Momentary push button on/off Roll button
1 × Omron A7B two digit thumbwheel Dice count selector
1 × Single pole 8 way rotary switch Dice type selector
1 × 74HC148 8 line to 3 line priority encoder Used with the 8 way rotary switch to reduce input lines to the processor
1 × 5mm LED (Red/Green/Yellow)
1 × 7805 voltage regulator Used for the battery powered pieces
1 × 9 volt battery Used for the battery powered pieces
1 × HP 5082-7466 HP MINI BUBBLE RED LED DISPLAY 5-DIGIT Used for the HD-16 based dice tower with the small 7-segment LED display
1 × 170V DC Boost Converter High Voltage Power Supply Module Used for the HD-16 based dice tower with the nixie tube display
1 × 10K potentiometer with knob Used for volume control on various devices
1 × 5.5 x 2.1 mm DC Power Jack Socket Threaded Female Mount Used for the HD-16 based pieces with external 12v wall wart power supply
1 × 9 volt battery connector