Quantity   Component name
13 × C1, C11, C13, C14, C15, C2, C3, C4, C5, C6, C7, C8, C9 1206 22u, JLCPCB part: C12891
2 × C10, C12 0603 100n, JLCPCB part: C14663
3 × D1, D2, D3 LESD5D5, JLCPCB part: C383211
1 × D10 0603 green led, JLCPCB part: C72043
1 × D11 0603 blue led, JLCPCB part: C72041
1 × D4, D5, D6, D7 0603 white led, JLCPCB part: C2290
1 × D8, D9 0603 red led, JLCPCB part: C2286
1 × J1 USB C receptacle, JLCPCB part: C668624
1 × L1 1uH coil, JLCPCB part: C436396
1 × Q1 Jellybean 2n7002 mosfet, JLCPCB part: C8545
1 × R1, R13, R2, R7 0603 5.1k resistor, JLCPCB part: C23186
1 × R10, R5, R6, R8 0603 10k resistor, JLCPCB part: C25804
1 × R11, R12, R9 0603 150 ohm resistor, JLCPCB part: C22808
1 × R3, R4 0603 1 ohm resistor, JLCPCB part: C22936
1 × SW1, SW2, SW3, SW4 tact switch, JLCPCB part: C318884
1 × U2 LDO 1117-33, JLCPCB part: C6186
1 × U5 IP5306 powerbank IC, JLCPCB part: C181692
1 × ESP32-S3-Wroom-1-N16R8 ESP32-S3 SoC, 16MB Flash, 8MB RAM, JLCPCB part: C2913202
1 × Left mounting skid Printed part, all available in single file
2 × Wheel Printed part, all available in single file
1 × Slider Printed part, all available in single file
5 × M3x10 bolt Used to assemble PCB to skids and slider
2 × MG90S continous rotation servo Muscles of Kabot
2 × Jumper wires Used to connect Li-Ion cell to the main board
1 × 18650 Li Ion Cell Main power source of the robot