Quantity   Component name
1 × Frame - Slider 750 mm Extendable bed, support 100kg with locking. Heavy Load Extensions https://www.junker-slides.com/fullutdrag-ladskenor/schwerlastauszug-750-mm-kv2-100-h53-l750-lc-lock-in-out-von-junker.html 750 mm KV2-100-H53-L750-LC Lock-in/Out Locking Function from JUNKER
3 × Frame - Aluminum square pipe 20x20x1.5mm 2meter Frame, legs and front opening.
2 × Frame - X-förbindelse KAISERTHAL för rör 90° svart 20 x 20 x 1,5mm https://www.hornbach.se/p/x-forbindelse-kaiserthal-for-ror-90-svart-20-x-20-x-1-5mm/5224088/
2 × Frame - X-förbindelse KAISERTHAL för rör T-stycke svart 20 x 20 x 1,5mm https://www.hornbach.se/p/x-forbindelse-kaiserthal-for-ror-t-stycke-svart-20-x-20-x-1-5mm/5224094/
2 × Frame - X-förbindare KAISERTHAL dubbel för rör 90° svart svart 20 x 20 x 1,5mm https://www.hornbach.se/p/x-forbindare-kaiserthal-dubbel-for-ror-90-svart/5224082/
4 × Frame - Vinkelplåt HETTICH vänster 45x60x16mm Fasten slider to frame https://www.hornbach.se/p/vinkelplat-hettich-vanster-45x60x16mm-25-pack/6826235/
4 × Frame - Vinkelplåt HETTICH höger 45x60x16mm Fasten slider to frame https://www.hornbach.se/p/vinkelplat-hettich-hoger-45x60x16mm-25-pack/6826252/
8 × All - screw M5 -10mm with mutter Fasten slider to Angular thing big
8 × All - screw M4 -10mm with washer and mutter Fasten slider to Angular thing small
1 × All - "many" Wood screw 4.2x16 Predrill 3.5mm 1. Secure X-Förbindare to 20x20 pipe 2. Fasten "Angular thing big" to frame in platic corner areas use "DIN 7981 Stålskruv 4.2x16"
1 × Frame - (optional) M5 mutternit To fasten "Angular thing big" to frame where there was not platic X-Förbindare inside the pipe. This is optional it seem just using the wooden scruws is good enough. Or you can make them go all the way trough
1 × Front - Aluminum L profile 65x35x3mm 1meter To make support for fasting front to slider (only about 2x150mm is needed)
1 × Front - Plywod 15mm 530x615mm 530mmx615mm(Width), 530mm is to get about 2000mm lenght, 12mm thickness would probably also work and lower weight a bit. NOTE the width (615mm) is dependent on your wagon base.
3 × Lower fastenings - Vinkelplåt HETTICH vänster 30x40x10mm Fasten front bed to slider https://www.hornbach.se/p/vinkelplat-hettich-vanster-30x40x10mm-25-pack/6826261/
3 × Lower fastenings - Vinkelplåt HETTICH höger 30x40x10mm Fasten front bed to slider https://www.hornbach.se/p/vinkelplat-hettich-hoger-30x40x10mm-25-pack/6826243/
2 × Lower fastenings - Aluminum L-beam 10x10x1mm 1meter Fasten front bed to slider, the middle bed area will rest in this.
10 × Lower fastenings - PVC L-Beam 20x30x2mm 1meter The back living walls will rest on this and can be fasten to it. I used a black one for a nice look.