Pico Pal GBC

4 new blog posts relating to Link port/IR, cart reading (which I couldn't add), the esp32 implementation for bluetooth audio and controller support, and a software update improving the colors and adding the rtc functionality.
https://picopalgbc.wordpress.com/

After getting the new boards in 2 weeks ago and working on some of the software I have an update for everyone with lots of posts and documentation on the blog along with some posts on reddit.
Let me know what you think!
https://picopalgbc.wordpress.com/2024/12/28/50-winter-update/

Finished designing the PCB and got 5 ordered which I am hoping to get in the next 2 weeks. As for now until next wednesday I will be focusing on my school and then after start writing code.

https://picopalgbc.wordpress.com/2024/12/02/36-routing-day-11-pcb-done/

Check out the blog post here
https://picopalgbc.wordpress.com/2024/11/11/30-schematic-done/

New blog posts on the site along with some cool features added in such as Stereo Audio, support for a bluetooth audio module, support for dual speakers, and a real time clock.

Hoping for this to be my last GPIO pin revision and wrap up the schematic!
https://picopalgbc.wordpress.com/2024/09/28/20-gpio-rev-c/

Replaced the Audio Pot with a navigation switch/rocker and updated the GPIO pin out.
Let me know what you think!
https://picopalgbc.wordpress.com/

Clarifying some timing with the IO expander along with 2 relating to the DVI over HDMI implementation.
More coming soon such as the revised GPIO pin out and part sourcing.

https://picopalgbc.wordpress.com/

I think documenting this project is pretty fun and keeps everything organized and I wanted to share this publicly in the case it helps anyone or you're just curious of whats going on.