Quantity   Component name
1 × ESP8266 Microprocessor with WiFi
1 × Geared Motor for toy car / robot With two output shafts (only one used)
16 × PL9823 LEDs Individually addressable LEDs in 8mm package
6 × 3D printed parts 100% fits 8mm LEDs, 62.5% scale fits 5mm LEDs
3 × Filament Rivets made from short pieces of filament. Heat up the end and use a flat piece of metal to mushroom it, completing the rivet.
1 × H bridge Motor Controller PWM signal from the microcontroller allows the motor to run in either direction
1 × USB power supply - 1.5A Easy way to get 5v power to the project
1 × Cut pieces of acrylic To cut and shape the acrylic, I used a circular saw, dremel tool, and hand files.
1 × Logic Level Converter , Bi-Directional https://www.sparkfun.com/products/12009
1 × Section of a 12V blue LED strip This one has a 150 ohm resistor in series with every 3 LEDs, not the most efficient.