Quantity   Component name
1 × 3D printed parts Download the files here. Use PETG or another durable material instead of PLA for better weather resistance.
1 × Teflon Diffuser Disk 40 mm diameter, 1 mm thick
1 × Powerbank At least 10,000 mAh for extended operation
1 × Jetson Nano Developer Kit (or Raspberry Pi 4 for basic setups)
1 × Cooling Fan To keep the Jetson Nano running smoothly
1 × Jetson Nano WiFi Module with 2 antennas
1 × MicroSD Card 32GB or larger for the Linux image and code
1 × Raspberry Pi Camera v2
1 × Ribbon cables for Raspberry Pi Camera v2 (45–60 cm)
2 × Parallax Feedback Servos For 360° movement (with aluminum disks)
1 × ESP32 Microcontroller
1 × perf board
1 × pin headers
1 × Neopixel Ring 8 LEDs (high-quality recommended)
2 × Pushbuttons any push buttons will do
1 × Control LED
1 × USB pen drive
1 × Additional parts Screws, spacers, washers, and USB cables