Quantity   Component name
1 × 7" HDMI Display https://www.amazon.com/dp/B0BGXB2Y67 - Display for the teleprompter
1 × PCSensor compatible USB foot pedals (3 way) https://www.amazon.com/dp/B088WCG7L4 - Controls for the teleprompter; you can substitute a keyboard or other USB HID as needed
1 × Raspberry Pi Zero 2W https://www.amazon.com/dp/B09LH5SBPS
1 × HDMI mini to HDMI cable https://www.amazon.com/dp/B07924ZMPL (This does not have to be flat sided; any appropriate cable will work. But the flat sided connectors fit better.)
1 × Micro USB C flat 5cm cable https://www.aliexpress.us/item/3256806278651505.html (OPTIONAL! You could replace this and the two angled components with a standard cable at the cost of the cable sticking out of the case a bit.)
1 × Female Micro USB flat connector https://www.aliexpress.us/item/3256806278651505.html (OPTIONAL - see above)
1 × Male Micro USB right-angle UP connector https://www.aliexpress.us/item/3256806278651505.html (OPTIONAL - see above)
1 × Micro USB Female to 2x Micro USB Male splitter https://www.amazon.com/dp/B017OPOG58 - Used to provide power to the display and Pi
1 × USB OTG adapter https://www.amazon.com/JSAUX-Adapter-Compatible-MacBook-Samsung/dp/B07BS8SRWH or any similar
1 × 1/4" Threaded heat set insets https://www.amazon.com/dp/B0D8T1PS8J - provide a camera mount connection for the teleprompter case
2 × OPTIONAL 11" Camera flash bracket https://www.amazon.com/dp/B08YJJJY34 - one holds the prompter, one holds the camera mount (you might need only one depending on your setup)
1 × OPTIONAL Phone tripod and mounting bracket https://www.amazon.com/dp/B0CHNV6QWG - I use this with the camera brackets to hold everything in place
1 × 5x7" glass from picture frame Any should do; I bought this at CVS. Be sure it doesn't have an anti-glare coating!