|
ChineseGT285BoltFlange.dwg
DWG Drawing -
23.98 kB -
02/01/2018 at 15:25
|
|
Download
|
|
DashDisplayR3.zip
Arduino sketch running an LCD display on the dash. This recieves data via UART and also feeds data out of the usb serial port for logging. Also displays text and audiable alarms.
x-zip-compressed -
2.04 kB -
11/20/2017 at 22:05
|
|
Download
|
|
PiggyBackSoftwareR07.zip
Current software running on the piggy back controller. Runs the engine well at around 450 mBar of boost. Runs on Infinion Dave
x-zip-compressed -
7.06 MB -
11/20/2017 at 22:02
|
|
Download
|
|
PiggybackDesignR01.pdf
Current piggy back design. Running well in the car.
Adobe Portable Document Format -
62.83 kB -
11/20/2017 at 21:59
|
|
Preview
|
|
|
Part005R1 Turbo Exhaust outlet.dwg
Part checked to fit
DWG Drawing -
131.26 kB -
04/05/2017 at 10:23
|
|
Download
|
|
Part004R1 Throttle Body Flange.dwg
not used but did fit
DWG Drawing -
138.54 kB -
04/05/2017 at 10:23
|
|
Download
|
|
Part003R1 Turbo Exhaust Inlet.dwg
Part checked to fit
DWG Drawing -
131.60 kB -
04/05/2017 at 10:23
|
|
Download
|
|
Part002R1 Rear Exhaust Ssystem Flange.dwg
DID NOT FIT. Holes on the corners are in the wrong position. Not updated to fit
DWG Drawing -
131.54 kB -
04/05/2017 at 10:23
|
|
Download
|
|
Part001R2 Engine Exhaust Flange.dwg
Parts checked to fit
DWG Drawing -
144.95 kB -
04/05/2017 at 10:23
|
|
Download
|
Rory