Files | Accesible Motion with Steppers

A Fully Assembled Board with the stepper connected.

JPEG Image - 3.45 MB - 07/02/2025 at 02:44

Front View showing the Encoder and buttons in place

JPEG Image - 2.25 MB - 07/02/2025 at 02:44

Programming Works! Checked basic blink program with the WCH Link E Dongle.

JPEG Image - 1.26 MB - 07/02/2025 at 02:44

SMD Devices are placed at the back of the PCB, to allow for buttons and controls on the front.

JPEG Image - 748.39 kB - 07/02/2025 at 02:44

Bare PCBs, front and back

JPEG Image - 1.03 MB - 07/02/2025 at 02:44

An intermediate assemble step. Notice the single pin headers used for programming access.

JPEG Image - 556.42 kB - 07/02/2025 at 02:44

JPEG Image - 132.64 kB - 07/07/2025 at 06:15

IMG20250701134058.jpg A Fully Assembled Board with the stepper connected. JPEG Image - 3.45 MB - 07/02/2025 at 02:44		Preview

IMG20250701134117.jpg Front View showing the Encoder and buttons in place JPEG Image - 2.25 MB - 07/02/2025 at 02:44		Preview

IMG20250701132829.jpg Programming Works! Checked basic blink program with the WCH Link E Dongle. JPEG Image - 1.26 MB - 07/02/2025 at 02:44		Preview

IMG20250701132701.jpg SMD Devices are placed at the back of the PCB, to allow for buttons and controls on the front. JPEG Image - 748.39 kB - 07/02/2025 at 02:44		Preview

IMG20250701132650.jpg Bare PCBs, front and back JPEG Image - 1.03 MB - 07/02/2025 at 02:44		Preview

IMG20250701132708.jpg An intermediate assemble step. Notice the single pin headers used for programming access. JPEG Image - 556.42 kB - 07/02/2025 at 02:44		Preview

WhatsApp Image 2025-07-07 at 11.45.12_b473fc82.jpg JPEG Image - 132.64 kB - 07/07/2025 at 06:15		Preview