Files | GoKart Tank | Hackaday.io

This is the suspension arm with bearings and shock installed. Next, make 7 more of these, mount the wheels and onto the chassis it goes.

JPEG Image - 2.12 MB - 04/07/2017 at 00:34

This is what the suspension will look like (mostly)

Portable Network Graphics (PNG) - 542.41 kB - 04/01/2017 at 03:32

3D printed the suspension arm to test fit the shock and road wheels to it

JPEG Image - 2.44 MB - 04/01/2017 at 03:31

Test run using no seated operator. The tank is in tethered remote control!

MPEG-4 Video - 15.77 MB - 03/20/2017 at 17:21

Suspension Arm.jpg This is the suspension arm with bearings and shock installed. Next, make 7 more of these, mount the wheels and onto the chassis it goes. JPEG Image - 2.12 MB - 04/07/2017 at 00:34		Preview

Suspension Drawing.png This is what the suspension will look like (mostly) Portable Network Graphics (PNG) - 542.41 kB - 04/01/2017 at 03:32		Preview

Suspension Test Fit.jpg 3D printed the suspension arm to test fit the shock and road wheels to it JPEG Image - 2.44 MB - 04/01/2017 at 03:31		Preview

20170312_172657.mp4 Test run using no seated operator. The tank is in tethered remote control! MPEG-4 Video - 15.77 MB - 03/20/2017 at 17:21		Download