Quantity   Component name
1 × Raspberry Pi 02W The SBC and primary host computer that runs the entire system.
1 × 40-Pin GPIO Header Strip GPIO Strip to be installed on the PI Zero if it does not already have headers soldered on.
1 × Waveshare Sense HAT (B) Sensor HAT compatible with Raspberry Pi - Provides acceleratometer, Gyroscope, Barometric Pressure data, ETC.
1 × HolyBro I2C Differential Pressure Sensor and Pitot Tube Differential Pressure sensor and pitot tube used to measure Airspeed.
1 × Assorted Jumper Wires (Female-Female) (Female-Male) Used to connect the Raspberry Pi and Waveshare sense hat with the Airspeed Sensor and GPS.
1 × Adafruit 99-Channel Ultimate GPS Module Used to measure ground speed and acceleration, checked against data from accelerometer and Airspeed Indicator.
1 × M2.5 Bolts, Nuts, and brass standoffs Used for assembly of the device and structural integity of the boards vertically.