| 1 |
× |
1st Generation Motorola Advisor (or Pager that supports POCSAG or GSC)
|
| 1 |
× |
XIAO ESP32 C3 with built in battery charging (or Generic ESP32-C3 SuperMini)
|
| 1 |
× |
10440 Button-Top 3.7v Vapcell F4 450mAh (or Generic USB C Rechargeable 3.7v 10440 750mWh 200mAh, maybe a 601230?)
|
| 1 |
× |
Tiny Out 1A LDO 1.8V (or mini DC-DC Buck Converter 1.5v output voltage with 2.5v-6.0v input voltage)
|
| 1 |
× |
3.7v 1S 2.5A li-ion BMS Protection Module with Overdischarge protection (Round type that goes on end of 18650 is smallest I foun
|
| 1 |
× |
Assorted Color Wire (I used solid core 22awg)
|
| 1 |
× |
Wiring harness tape(Tesa cloth fabric tape)
|
| 1 |
× |
Serial UART adapter for programming pager (Worked best in DOSBOX: RadioMaster ExpressLRS USB UART Flasher V2)
|
| 1 |
× |
3d printed TPU programming POGO adapter for Motorola Advisor (Included in 3d_prints folder)
|
| 1 |
× |
Male to Female DuPont jumper wires for 3d prints
|