Jon Thomasson-
Boards in and tested!
01/31/2018 at 16:00 • 0 commentsGot the boards back from oshpark about a month ago, but had a chance recently to assemble. After tying BS0 and BS1 to ground to enable SPI, I tested the OLED with the adafruit SSD1351 driver library: here. Here's the result:
![]()
And here's a look at the back:
![]()
1.5" SSD1351 OLED Breakout
This is a breakout board for a 1.5" color OLED with an SSD1351 driver. All of the pins are broken out for ease of prototyping.
