Quantity   Component name
1 × Arduino Nano v3.0
64 × Bright Diffused Common Anode RGB LEDs The common anode part is important !!!
7 × 74HC595 Shift register
7 × ULN2803A Darlington Transistor Arrays
4 × F9Z34N MOSFET One for every layer of 4x4 LEDs
4 × 220 Ohm Bourns Resistor Array 16-DIP Pre resistor for LEDs
2 × 330 Ohm Bourns Resistor Array 16-DIP Pre resistor for LEDs
2 × 150 Ohm Bourns Resistor Array 16-DIP Pre resistor for LEDs
2 × 22 Ohm Bourns Resistor Array 16-DIP Pre resistor for LEDs
2 × Switch IC 16-DIP Color blue only needs one resistor array, use switch for the second socket
12 × 16-DIP Sockets For the resistor arrays
8 × 0,01 uF Capacitor De-coupling
5 × 47 uF Capacitor De-coupling
6 × 8-Pin Socket and plug To connect LEDs to circuit board
9 × 10K Resistor Pull up/down resistors
1 × Germanium Diode Reverse polarity protection
1 × Spring Steel 0,8 mm diameter For the LED frame