Quantity   Component name
2 × Plates 2 aluminum plates, 1/4" 6061, cut to 6.75x7. Would be nice to waterjet (or otherwise cut) into arches.
2 × Top Rods 5/8 aluminum rods, cut to 11" with 5 notches in center spaced by 1" Axially tapped for 1/4-20
2 × Bottom Rods 5/8 aluminum rods, cut to 11" axially tapped for 1/4-20. Actually I used 1/2" bc I ran out of 5/8 rod.
1 × Epoxy Locktite "extra time" epoxy
5 × String Polyester uncoated lacing braid. Mil Size 5. LT2-S5-FA-NT. Availiable from wirecare.com
5 × Balls 1" diameter steel bearing balls. Colored by heating with propane torch.
5 × Nuts 5/16 nuts (1/2" flat-flat) Drilled thru opposing flats to make hangers