(personal ambient space sensor) humidity, pressure and temperature logger
Already have an account? Log in.
To make the experience fit your profile, pick a username and tell us what interests you.
Record humidity, air pressure and temperature.
Store readings in an external EEPROM.
Link reading to the current time using a real time clock.
Low power.
How small can the circuit board get?
A unique package - currently I am looking a triangle shaped tube.
Next version will have capacitive sensor pads for user input and an OLED display.
I just changed the name from Humidos to PASS (personal ambient space sensor).
It is a better descriptor for this project.
I added a picture of the schematic to project details, but if you like this project grab a copy from UpVerter.
The next step is the battery and packaging design.
In the vid I show the board taking readings from all the sensors and displaying them the screen.
I first added my newly burned ATMEGA328 and programmed it. Then I added the pressure sensor.
The pressure sensor has solder pads under the chip! yikes! I used solder paste and a toaster oven.
I needed to reflow the solder because the first time the BMP180 did not fully seat, so I re-heated the board removed the chip, cleaned the board, added more solder past and reflowed the chip - ah much better.
Learn upverter - easy to learn and use and over the past month they have been updating the software and adding some nice features that EagleCad does not have like toggle layers on/off - show only top or bottom layer.
I ordered my completed board from upverter and they used OSH Park. I ordered 2 for about $23 and recieved the boards in about 2 weeks 1 week before I exprected it. Also, I got 3 boards one as a bonus.
This is my bread board to burn bootloaders on to ATMEGA328's.
I can quickly burn my own Arduinos!
Using Optiboot https://code.google.com/p/optiboot/ make this task easy.
Step 1. load the Optiboot sketch on to an arduino - on reset the program searches for one of four different target chips and automatically starts to write the bootloader - done!
The circuit is on upverter. https://upverter.com/donsmrkatz/1b5793121c45bbf0/ProgramConnector/
Learn upverter - I like the idea of free tools and upverter is right tool for this project. They have an integrated BOM which is a big plus.
Learn how to burn a boot loader onto an ATMEGA328.
How to log humidity, air pressure and temperture using low power (sleep mode), battery backup and real time clock. I will be using sleep mode and reset.
Don Smith
williamg42
Colin McAllister
Nolan Moore
DatanoiseTV