Build Instructions

Collapse

• 1

  Step 1

  Preparation
  

  The shelf rail is used to create an U-formed frame (as handle) and the legs.
  

  Mark 150cm shelf rail at 50, 100 and 150cm (two U frames and 4 legs). Dor the center segment, add marks at 12.5cm, 25cm and 37.5cm (4 equal parts - legs). For the two other segments add marks at approx 17cm from each end.

  The numbers depend on the LED light used...
  

  Do NOT cut the shelf rail now, as the additional segments are used as lever to bend the shelf rail.
  

• 2

  Step 2

  "U" frame
  

  Method a) just use a vice

  method b) bend the shelf rail in three steps:
  

  b1) put the shelf rail on the table edge and firmly bend it to mark the location

  b2) put the shelf rail on the floor, put a chair on top and sit on it, bend the shelf rail as far as possible towards 90°.

  b3) apply force to bend it to 90°

  
  
• 3

  Step 3

  repeat for other 17cm part and cut after first 50cm:

  
  

View all 8 instructions