Quantity   Component name
1 × KiteBoard "Motherboard" of the phone, with connectors for low speed I/O, display, camera, IPX connectors for antennas
1 × Expansion Board This breaks out the low speed I/O (and level converts) into a 40 pin Raspberry Pi HAT connector. Also provides 5V and 3.3V power. Plus breakout for speaker, mic, earpiece and buttons
1 × Button Sized Vibration Motor
1 × 3.5 mm Audio Jack Digikey P/N SJ-43515TS
3 × Standard Push Buttons For power on, volume up, volume down.
4 × 2 pin micro connectors Locally sourced connectors. used for wiring speaker, microphone, earpiece and vibrator
2 × Pogo Pins For battery holder, Digikey P/N ED90458-ND
1 × WiFi/BT Antenna TE Connectivity, P/N 2118309-1
1 × LTE Antenna Ethertronics, P/N 1002289
1 × Display Module 5" 720p display module with 5 point capacitive touch. This has separate flex cables for display & touch parts.
1 × Display Board Intermediate board between KiteBoard & Display Module.
1 × KiteBoard to Display Board Flex Cable A custom flex cable, 30 mm length
1 × Display Board to Display Module flex cable 38 pin 0.5mm pitch flex cables. First & Last pins are NC.
1 × 8 MP Autofocus Camera Module Based on OV8865
1 × Speaker 6 Ohm, P/N PSR1511N06S3K
1 × Microphone Digikey CMC-3015-44T
1 × Earpiece Digikey P/N RC-1206