Quantity   Component name
1 × Rapberry pi 512 model
1 × RPI camera board Not the infra type
1 × sd card any type that works
1 × 7 inch lcd screen from ebay migh be better to get a hdmi one I did not
1 × lighted red arcade button any off ebay
1 × Black 3d filament for printer This is for the parts that are printed.
1 × power supply ( I used a psu from a old pc)
1 × 12 inch forming tube Body of the photo booth
1 × 1 1/2 pvc pipe This is for the neck of the photo booth
1 × 2 inch pvc pipe this is so the neck and slide in to the body
1 × 50 lbs of concrete weight at the botten to make it less top heavey.
1 × 1/2 or 3/4 inch blue foam board this is used a lot for the face back of head bosy parts etc.
1 × vinyl for the 3d printed parts I used carbon fiber for the black parts. It looks cool.
1 × vinyl for the body and head blue ish purple because my wife likes it.
1 × carpet / cut mat for the bottom just incase and less vinyl used.
1 × Lots of screws and nuts