3D Printed Pot Handles and Car Sun Visor

Description

I'm not sure if I ever saw that pot with two handles. I know it had one at one point, but then it disappeared too. Weird. My grandparents have the same pot so I took one of the handles, copied it as well as I could in Solidworks 2015, and printed it in ABS.

The mirror holder on the passenger side broke a few years ago becomes sooooomebody might have tried to lower it the wrong way (In my defense, the sun was shining in my face, and I was trying to read). It was held together by some ugly brown epoxy and when I got my printer this was the first thing I repaired. It's made in gray PLA and it's holding pretty well for now but if I see it starts to fail I'll make an ABS version.

Files

Pot Handle.SLDPRT sldprt - 2.32 MB - 02/16/2018 at 00:39		Download
SunVisor.SLDPRT sldprt - 1.86 MB - 02/16/2018 at 00:38		Download
SunVisorFront.png Portable Network Graphics (PNG) - 104.47 kB - 02/16/2018 at 00:33		Preview

SunVisorPerspective.png Portable Network Graphics (PNG) - 73.96 kB - 02/16/2018 at 00:33		Preview

SunVisorBack.png Portable Network Graphics (PNG) - 65.03 kB - 02/16/2018 at 00:33		Preview

View all 19 files

3D Printed Pot Handles and Car Sun Visor

Become a Hackaday.io member

Just one more thing

Description

Files

Pot Handle.SLDPRT

SunVisor.SLDPRT

SunVisorFront.png

SunVisorPerspective.png

SunVisorBack.png

Enjoy this project?

Discussions

Become a Hackaday.io Member

Does this project spark your interest?

Report project as inappropriate

Send message

Remove Member