Close
0%
0%

HellZXcreiber

HellZXcreiber for ZX Spectrum

danjovicdanjovic
Following
Liked Like project

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

Pick an awesome username
hackaday.io/
Your profile's URL: hackaday.io/username. Max 25 alphanumeric characters.
Pick a few interests
Projects that share your interests
People that share your interests

We found and based on your interests.

Choose more interests.

OK, I'm done! Skip
Similar projects worth following
3.4k views
2 comments
133 followers
View Gallery
On the late 20's and Rudolf Hell invented the HellSchreiber, an ingenious fac simili teletext printer system, that was extensively used during WWII and later until the 60's.
The HellSchreiber transmitter consists of a typewriter machine connected to a spinning drum with contacts that creates a digital (binary) modulation of the 'pixels' of the typed character. The receiver consists of a spinder wheel activated by a solenoid that creates marks on a reel of paper that continously run. It's simple, it's brilliant, but with advance of telecommunications the Hellschreiber was abandoned.

In the early 90's the home computers got more advanced which allowed the Radio Amateurs to rediscover this method of communication by performing the encoding and decoding of the signals in software. Indeed, several variants were created and up till today it has several users.

Even in the 80's the computers could have done that, with a proper software. That's what this project is about.

The audio signal is input to the EAR socket of ZX spectrum.

Key controls:

  • '9' changes reception speed preset (105, 122.5 and 245 baud)
  • '5' tune down (decrease) reception speed
  • '8' tune up (increase) reception speed
  • '0' when pressed plots black pixels to check present rendering position 

  • 1 × Text Editor with Z80 assembly Highlight The choosen editor was "Context"
  • 1 × Z80 Assembler It was used PASMO, that can generate .tap files to be loaded on an emulator
  • 1 × ZX Spectrum Emulator Can be either Fuse, RealSpec, Eighty One, or Spectaculator. Fuse was used due to its timing accuracy

  • First working version

    danjovic • 04/13/2014 at 19:11 • 0 comments

    Finally I could get my hands again on a real ZX spectrum (TK90X). The first tests showed that a single sample for each bit produced bad results (video).

    A new sample routine was added within the delay loop for each bit. If there is signal a counter is incremented. At the end, if at least 1/4th of the samples were active, then a symbol (bit 1) is recognized and plotted as a black pixel. Otherwise it plots a white pixel .

    This sampling routine was tested with the sound sample found in the Wikipedia article about Hellschreiber (video)  as well as with some text generated by fldigi (video) and behave very well. It makes possible to use the volume control to change the 'intensity' of the black ink, which may be very useful when testing with live reception signals or recorded from live radio. This was tested using the sample in WB8NUT website.

    Source code in .asm as well as .tap image available.

  • Early Release

    danjovic • 03/23/2014 at 18:19 • 0 comments

    This is an Early Release for the project. The Decoder is working on the emulator and it's ready to be tested on a real machine. It can toggle between 3 basic speeds and allow the tweaking of the speed. The input shall be performed by key 0 or "RIGHT" on a Kempston joystick

View all 2 project logs

Enjoy this project?

Share

Discussions

Alex wrote 09/07/2018 at 06:51 • point

Nice! How about hell transmitter?

  Are you sure? yes | no

Noone wrote 08/07/2014 at 08:24 • point
In the 1970s and 80s, Hellschreiber software was made for Apple ][, MS-DOS, Commodore 64/128, Olivetti M10, Tandy 100, Acorn, Z80, etc. See www.hellschreiber.com

  Are you sure? yes | no

Similar Projects

The simple DIY retro game controller with PIC MCU which generates VGA signal, music and sound effects
Project Owner Contributor

Single chip game console

voja-antonicVoja Antonic

Find yourself stuck indoors during a pandemic? Why not build an open-source microcontroller powered video streaming service?
Project Owner Contributor

ESPFLIX

rossumurrossumur

circuit to modify in real time old analog video signal.
Project Owner Contributor

PAL/NTSC video Mangler

julienJulien

Retro gaming console based on a high performance, software HD video adapter running on a dual-core microcontroller.
Project Owner Contributor

RETRO-CIAA

santiago-germinoSantiago Germino

Does this project spark your interest?

Become a member to follow this project and never miss any updates

By using our website and services, you expressly agree to the placement of our performance, functionality, and advertising cookies. Learn More

Yes, delete it Cancel

Report project as inappropriate

You are about to report the project "HellZXcreiber", please tell us the reason.

Send message

Your application has been submitted.

Remove Member

Are you sure you want to remove yourself as a member for this project?

Project owner will be notified upon removal.