Quantity   Component name
1 × Hot cap The outer Can
1 × Displacer The inner Can
1 × Planar Spring Attached to the displacer
1 × Membrane Fabricated from Beryllium copper
1 × Master Ring The big circular ring that keeps everything together
1 × Sealed chamber Seals the area around the center of the membrane, consists of 2 parts & a central screw
2 × Gaskets (rubber) One for each side of the sealer chamber
1 × Gasket (rubber) Placed between the membrane & the Master ring
1 × O ring Places about the membrane. Then 24 screws are added to keep everything in place
1 × Tripod stand For the device to stnd on !
3 × Springs O the master ring allowing the Master ring to move on the tripod.
1 × regulator pin To regulate the pressure in the device