Quantity   Component name
1 × Game of Drones Hiro body
1 × Naza M Lite flightcontroller (flashed to Naza V2 fiwmare)
4 × SunnySky x2212 v2 motors
2 × Turnigy 2200mah LiPo batteries
4 × Afro 30 Amp ESC's
1 × FxSky Taranis X9D transmitter
1 × FrSky x8r reciever
4 × 1045 propellers I ordered both carbon fibre and plastic blades. I find the carbon fibre blades are dangerous and fragile, but slightly improve flight characteristics .
1 × Walkera G-3D gimbal
1 × Gopro camera
1 × Fatshark Teleporter V3 FPV Googles
1 × FatShark Pilot HD camera
1 × Fatshark Video TX (250mw)
1 × Power breakout cable
4 × DJI Flamewheel Landing Gear
16 × Nylon standoff mounts Used to support elevated electronics platform and battery trays.
1 × Plastic dustpan The elevated electronics platform and battery trays were cut from this. It was the easiest material I could find locally. Carbon finer would be much nicer.
18 × Nylon bolts
2 × Nylot nuts
1 × GoPro USB to Composite video cable
1 × Velcro, cut for 6 battery straps
50 × Cable ties Many cable ties are used for the wiring and holding the upper and lower parts of the body shell together.
1 × Various wiring and shrink tube.