WooDWorkeR-
Preparation for final deployment at c-base
01/04/2016 at 13:09 • 0 commentsThe 32c3 installation of the warpcore was a kinda temporary installation with flying wires and because we need the power of the warpcore at c-base in a more long term installation i finally did a small board for connecting the MCU (Arduino Pro Mini) to the controll hardware.
![]()
And as one of the most professional ways to connect 2 or more things together is zip ties, we used them.
-
warpcore live at #32c3
12/27/2015 at 18:42 • 1 commentYou can view the warpcore live at the c-base assembly
A very simple firmware is used for demo use at 32c3.
-
warpcore demo
09/25/2015 at 16:12 • 0 commentsThe inner tube with all the LEDs was already done last year. And this is a small video done by XenGi.
-
Hardware done.
09/25/2015 at 16:08 • 0 commentsToday i did the final mechanical installation of the inner tube in the lamp.
The rest is now just "software".
![]()
![]()
warpcore
The warpcore is, when 100% complete, a portable power generator with a max output of 1.209 gigawatts. Until then it's an Ambient Light.
