Close
0%
0%

Pointduino Mini

Very tiny Arduino compatible board

furkan-etinFurkan Çetin
Following
Liked Like project

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

Pick an awesome username
hackaday.io/
Your profile's URL: hackaday.io/username. Max 25 alphanumeric characters.
Pick a few interests
Projects that share your interests
People that share your interests

We found and based on your interests.

Choose more interests.

OK, I'm done! Skip
Similar projects worth following
2.3k views
4 comments
22 followers
View Gallery
This is one of the simplest Arduino compatible board. In a 18mm x 18mm sized board, it has only Atmega328 chip on the top side of the pcb while other side consists of 8 mHz crystal and AMS1117 voltage regualtor as well as with some capacitors and a resistor.
  • 1 × Atmega328 Microprocessors, Microcontrollers, DSPs / ARM, RISC-Based Microcontrollers
  • 1 × AMS1117 (3.3v regulator)
  • 1 × 8 mHz Crystal
  • 2 × 22pF Capacitor
  • 2 × 1 uF Capacitor

View all 7 components

Enjoy this project?

Share

Discussions

alpha_ninja wrote 12/07/2015 at 00:51 • point

I can't find your design files, could you link to them?

  Are you sure? yes | no

alpha_ninja wrote 12/02/2015 at 00:46 • point

This is your one-week reminder to upload design documents: https://hackaday.io/project/7813-the-square-inch-project/log/28566-design-deadline

  Are you sure? yes | no

deʃhipu wrote 11/08/2015 at 13:06 • point

I love it. One could solder two rows of the pins on one side, and two on the other, still making it breadboard-compatible.

  Are you sure? yes | no

zakqwy wrote 10/08/2015 at 15:42 • point

#The Square Inch Project

  Are you sure? yes | no

Similar Projects

Development board for ATtiny 24(A)/44(A)/84(A) with ICSP programming header and Arduino IDE support.
Project Owner Contributor

ATtiny84 Development Board v2

stefan-wagnerStefan Wagner

ATTINY816 on a small board designed to fit the arduino nano 3.0 terminal breakout
Project Owner Contributor

ATTINY basic stick

david-brownDavid Brown

A straight-forward tutorial on how to properly get the Maker Uno ready to work with Arduino-compatible software and hardware.
Project Owner Contributor

Maker Uno Setup

electorialsElectorials

The SAM 15x15 is an Arduino development board, with the same powerful controller as the Arduino Zero: the SAMD21G18.
Project Owner Contributor

Arduino Zero compatible SAMD21 board 15x15mm

albert-van-dalenAlbert van Dalen

Does this project spark your interest?

Become a member to follow this project and never miss any updates

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Yes, delete it Cancel

Report project as inappropriate

You are about to report the project "Pointduino Mini", please tell us the reason.

Send message

Your application has been submitted.

Remove Member

Are you sure you want to remove yourself as a member for this project?

Project owner will be notified upon removal.