Pointduino Mini

Description

This is one of the simplest Arduino compatible board. In a 18mm x 18mm sized board, it has only Atmega328 chip on the top side of the pcb while other side consists of 8 mHz crystal and AMS1117 voltage regualtor as well as with some capacitors and a resistor.

Components

1 × Atmega328 Microprocessors, Microcontrollers, DSPs / ARM, RISC-Based Microcontrollers
1 × AMS1117 (3.3v regulator)
1 × 8 mHz Crystal
2 × 22pF Capacitor
2 × 1 uF Capacitor

View all 7 components

Discussions

alpha_ninja wrote 12/07/2015 at 00:51

I can't find your design files, could you link to them?

Are you sure? yes | no

alpha_ninja wrote 12/02/2015 at 00:46

This is your one-week reminder to upload design documents: https://hackaday.io/project/7813-the-square-inch-project/log/28566-design-deadline

Are you sure? yes | no

deʃhipu wrote 11/08/2015 at 13:06

I love it. One could solder two rows of the pins on one side, and two on the other, still making it breadboard-compatible.

Are you sure? yes | no

zakqwy wrote 10/08/2015 at 15:42

#The Square Inch Project

Are you sure? yes | no

Pointduino Mini

Become a Hackaday.io member

Just one more thing

Description

Components

Enjoy this project?

Discussions

Become a Hackaday.io Member

Does this project spark your interest?

Report project as inappropriate

Send message

Remove Member