With Wikit Board

Without Wikit Board(trial version instruction) will in the next step

Without Wikit Board

Still want a try?

You need to take the following steps to make it work.

1) You need to have one nrf51822 board (any kind)

2) Dowload the firmware and softdevice in project attachment part

3) put it into your nrf51822 board

4) get one buzzer ready for first trial. open IDE and put it on leftmost location

5)connect buzzer with p0.14/gnd/vcc on your board

6)Then enjoy your flowchart programming :)

Talk to us if you want more with your own board. We will help you to make it work

"minqibao@ringwill.com"