Quantity   Component name
1 × LinkIt Smart 7688 Wi-Fi and Ethernet development board. Runs OpenWRT Linux.
1 × Seeed Studio Breakout for LinkIt Smart 7688 provides ethernet port and I2C audio DAC.
1 × Modded Lightsaber Customized with D-Sub connector to beam LEDs. Lightsaber credits to Makoto Tsai.
1 × 8 ohm 0.5w Speaker
1 × DB-9 connector for Wiring type
6 × 2N2907 PNP transistors
6 × 680 ohm resistor
1 × perfboard Cut into 6x5 size, for the connector
8 × Male to Female Dupont cables At least 8 dupont cables to connect GPIO pins, PWR and GND to the DB-9 connector
1 × Micro-USB Cable For powering the development board
3 × Jumping wires for connector and speaker
1 × Acrylic Sheet Laser cutted into the frame of the stand.
6 × M3 bolt
4 × M3 nut