new LEDs are working & new control board layout

The new LEDs are the right ones. Now at least the LED PCB do work. Here is a picture of the soldered LED PCB:

I also redesigned the control PCB: Now the bigger SOT23-6 Transistors do fit and it is inside of OSH-Park's Manufacturing specifications. The new board for the contol PCB are already orderd. So I hope I will have a first working prototype soon.

Discussions

Roman wrote 04/17/2016 at 21:26

PCB is looking good. I am sure this display will be fun to play with.

Are you sure? yes | no

davedarko wrote 04/17/2016 at 18:16

that is such a beautiful display! is the pin spacing 1.27mm? I think I need a coin or fruit for reference.

Are you sure? yes | no

Alex wrote 04/17/2016 at 18:25

Thanks!
Yes the pin spacing is 1.27mm/50mil. As reference there is also the 1mm grid on the paper in the background. But you are right a coin (or banana) would me more obvious.

Are you sure? yes | no

somehow this project is doomed .. or I do not carefully enogh check footprints

what happend to the tiny 0404 RGB LEDs?

Discussions

Become a Hackaday.io Member