Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer'

Projects Jean-Marc Montanier likes and follows

97.9k
1,356.9k
2.1k
Follow for the 'Hacklet' and latest news about hackaday.io
Project Owner Contributor

Hackaday.io Project

lutetiumLutetium

7.2k
7.6k
47
Visually impaired students can make great use of 3D prints to learn just about any subject, but their teachers need help making good models.
Project Owner Contributor

3D Prints for Teachers of the Visually Impaired

joan-horvathJoan Horvath

5.8k
36
Aluminum 3D printer made of Actobotics components.
Project Owner Contributor

18" x 15" Aluminum 3D Printer

eviscerate-coreEviscerate Core

9.1k
5.7k
9
Use of solar panel and supercapacitor to enable an 3.3V 8MHz ATMega386P to function as remote IoT solution using LoRaWAN.
Project Owner Contributor

Solar & supercap charged LoRaWAN IoT device

pmbnlPMBNL

12.5k
5.5k
14
A low cost bed upgrade that adds a second slave heater to allow the bed to reach 110C and also makes the bed flatter and more rigid.
Project Owner Contributor

Monoprice Mini 3D Printer Bed Upgrade

dave-whiteDave White

5.1k
5.4k
19
Can low-cost embedded platforms designed for the Internet of Things have a positive impact on healthcare?
Project Owner Contributor

Towards an IoT for Healthcare

illuminoillumino

5k
5.2k
44
A controller for all your IoT needs.
Project Owner Contributor

ESP IoT Controller

jeremiasJeremias

6.9k
4.7k
48
I was always fascinated by delta robots. So I built one.
Project Owner Contributor

Delta robot "deltaR"

malte-ahlersMalte Ahlers

7.1k
4.4k
14
This Gopro hack allows wired control for robotics applications, using any microcontroller, without break or damage the buttons
Project Owner Contributor

Gopro Hero 4 wired control

andresrengifoAndresRengifo

3.6k
3.4k
20
How to turn your Raspberry Pi into an all-in-one retro gaming console
Project Owner Contributor

Retropie: Full guide for Raspberry Pi

dmitryDmitry

80.8k
2.5k
577
An Odrive + steppers based construction, with 5x 3D printed hollow shaft reducers and an internal CAN network.
Project Owner Contributor

Atlas - 6DOF 3D printed universal robot

damian-lickindorfDamian Lickindorf

2.1k
2.3k
3
Step-by-step instruction to install Mono on Raspberry Pi
Project Owner Contributor

Mono on Raspberry Pi

dmitryDmitry

2.1k
1.7k
7
Raspberry Pi Pico misses out on an EEPROM, so why not add it by ourselves, that too EEPROMs are dirt cheap.
Project Owner Contributor

How to Add an EEPROM to Raspberry Pi Pico

shivasiddharthshivasiddharth

1.3k
1.4k
16
5 Axis articulated robotic arm. Actuated by planetary reduced open-loop stepper motors.
Project Owner Contributor

PROJECT-A

sixthnassauSixth_Nassau

1k
1.1k
12
Sometimes simple is better.
Project Owner Contributor

A 3D Printed Simple "Walking" Mechanism.

greg-zumwaltGreg Zumwalt

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2025 Hackaday