Projects Alex Rich likes and follows

Sort by:

For "Repairs You Can Print Contest", and for the sake of documenting the repairs and improvements, done by 3D printing.

3D Printed Repairs

christian-lerche Christian Lerche

Parts for my motorcycle are getting harder to find and when the original choke lever broke I 3D printed a replacement.

3D printed Motorcycle Choke

The 2018 Hackaday Prize

How my once useless toolbox got back into business

Repairing my toolbox with a 3D printed part

matthias-kesenheimer Matthias Kesenheimer

Making the Boots Industries V2.5 3D printer usable.

Boots V2.5 Printer Repairs and Upgrades

Replacement case for PTX-4 type garage door remotes common in Australia. My case design incorporates flexible button keys.

Remote Control Case with Flexible Buttons

Simple solution to direct solder fumes away from your workbench while remaining wireless, portable, and quiet.

Solder Fume Extractor - Battery + USB

This old drill is still handy for light use around the house, but the NiCd battery pack is long dead. Why not use 4x AA NiMH cells in it?

Replacement Battery for Ryobi 7.2v Drill

Broke the zipper on your coat? Print a fix.

3D Printed Zipper Box

ted-yapo Ted Yapo

The 2018 Hackaday Prize

I 3D printed zippers to connect two REI mummy bags- a great way to cuddle with an SO while out camping!

3D Printed Zippers for Sleeping Bags

katie-g Katie G

Repair of a Mantis microscope using 3D printing

Mantis Microscope Repair

My old Honda Pilot key cracked, and it was $150+ for a replacement... I can do better.

Honda Key Repair

keith-violette Keith Violette

The 2018 Hackaday Prize

How a silly mistake led to a 3D printed part.

A stand for my multimeter again

matthias-kesenheimer Matthias Kesenheimer

The 2018 Hackaday Prize

Our 10+ year-old floor lamp still looks and works great, but the plastic shades for each head had become brittle and crumble over the years.

Torchiere floor lamp relacement shades

Mike Piantanida

The NDS Lite is old enough that replacement batteries are no longer available. So here's how to adapt a generic lithium cell for it.

18650 Battery Adapter for Nintendo DS Lite

A 3D printable bracket to both support and hold a shelf in place.

Simple but Effective Shelf Retention Bracket

Panasonic microwave doors have a bad tendency to stop working over time. This is a quick 3D printed fix.

Panasonic microwave door latch fix

Replacements for stripped gears in my grandma's old stand mixer.

Gears for Grandma's Mixer

Replacement for the foot pedal hinge in a kitchen garbage can.

Garbage Can Foot Pedal Fix

Repairs you can print. Prevent dehumidifier buttons from damaging the circuit board.

When circuit bending isn't cool.

adwiebe adwiebe

After the original hood ornament star of our dear MB-E 220 has been ripped out yet again, I decided to create and 3d-print my own.

Cooler-Figur

My glue gun trigger broke, I re-created the broken part.

PRSOUC35K glue gun revival (3D printed part)