Close

Recent Projects

Time for a Tiny LM
Project Owner Contributor

Arduino Neural Cluster

cyplesmacyplesma

Just my way of making my breadboard life a little easier
Project Owner Contributor

Breadboard Extenders

cyplesmacyplesma

A hand-pull pump for serving beer in the style of traditional English cask ale
Project Owner Contributor

Bodgy Beer Engine

levyLEVY

A smart waste sorting pendulum system to classify and physically sort trash.
Project Owner Contributor

EcoVision

alex-duAlex Du

Building a large-scale, 3D printed, RC plane. Original Merlin V2 design by Gabe Janssen (Lambda Flightworks)
Project Owner Contributor

Project Ryno - Fixed-Wing RC UAV

chris-vaisnorChris Vaisnor

RTL-SDR sticks need some love, This self-contained web page receiver does just that
Project Owner Contributor

OFFgrid-SDR

diddydiddy

Build the board. Snap in the box. Deploy in the field.
Project Owner Contributor

ADX: Enclosure-Native Modular Hardware Standard

masahiro-furukawaMasahiro Furukawa

USB keystroke injection hardware with an open-source firmware philosophy and a free browser editor for PnP Script.
Project Owner Contributor

PlugnPwn — USB keystroke injection

anastasios-kaltakisAnastasios Kaltakis

A momentary-button power switch using an onboard MCU and bistable relay to disconnect the host circuit when off.
Project Owner Contributor

ZeroLeak: Momentary Power Switching with a Bistable Relay

michael-yimMichael Yim

A 60 x 32 pixel I2C OLED module with castellated pads and 0201 passives for space-constrained builds.
Project Owner Contributor

0.32-inch Castellated OLED Display

michael-yimMichael Yim

A 27 x 20 mm PN532 reader with a four-layer PCB, SPI interface and hybrid castellated/header connections.
Project Owner Contributor

Compact PN532 NFC/RFID Castellated Module

michael-yimMichael Yim

A pair of six-pin flat-flex cable breakouts with cut-out tabs for routing a strain-relief loop.
Project Owner Contributor

6-Pin FFC Breakouts with Cable Strain Relief

michael-yimMichael Yim

Transparent 48×64 SPI LCD with an ST7565 controller and no built-in backlight.
Project Owner Contributor

0.8" Transparent 48x64 LCD SPI Display Module

michael-yimMichael Yim

A 96×64 RGB OLED breakout using the SSD1331 controller and SPI.
Project Owner Contributor

0.95 RGB 65K Color SSD1331 96x64 OLED SPI Breakout

michael-yimMichael Yim

A DS28E17 breakout bridging a 1-Wire connection to an I2C master interface.
Project Owner Contributor

1-Wire To I2C Bridge DS28E17Q+ Breakout Board

michael-yimMichael Yim

People seem to forget that Boomers had iPads too...
Project Owner Contributor

The Hack-A-Sketch: SuperCon 2026 Badge Hack

geoff-mcintyreGeoff McIntyre

By using our website and services, you expressly agree to the placement of our performance, functionality, and advertising cookies. Learn More